Cost Guide · DFW

How Much Does a Garage Floor Coating Cost in Dallas–Fort Worth?

By Alek·Updated August 2026·6 min read

Quick Answer

Garage floor coating in DFW runs $4.50–$14 per square foot installed, depending on the system. A standard 2-car garage (about 450 sq ft) typically costs $2,000–$6,300. Solid color is the most affordable option; metallic is the most expensive. Slab condition and square footage also move the price.

2026 Garage Floor Coating Costs by System

Here’s what a standard 2-car garage (about 450 sq ft) typically costs by coating system across the DFW metro.

System Cost per Sq Ft 2-Car Garage Total
Solid Color Epoxy $4.50–$6.50 $2,000–$2,900
Chip-Flake Epoxy $5.50–$8.50 $2,475–$3,825
Polyaspartic $6.50–$10 $2,925–$4,500
Metallic Designer $8–$14 $3,600–$6,300

These ranges already reflect standard diamond-grind prep. Your exact price depends on slab condition and finish choice.

Want your exact number, not just a range?

Get My Price →

What Actually Moves the Price

Square footage is the biggest factor, but larger floors usually unlock a lower per-square-foot rate — a 3-car garage doesn’t cost proportionally as much more as you’d expect.

Coating system matters just as much. A chip-flake system hides imperfections and costs more than solid color; metallic epoxy is the premium option.

Slab condition is the wildcard. Cracks, oil stains, and old peeling coatings all add prep time — which is why we confirm the final number after a free on-site visit, not over the phone.

Real DFW Project

A homeowner in Plano with a 3-car garage (about 650 sq ft) and moderate oil staining chose chip-flake epoxy. The stains added about 30 minutes of extra prep time but didn’t change the quoted price — we’d already accounted for it during the free on-site assessment.

Garage floor epoxy coating installation by LNM Epoxy — Plano, TX
3-car garage, chip-flake epoxy system — Plano, TX

See how our pricing compares to DIY kits and other contractors.

Read Our Reviews →

Why We Don’t Quote an Exact Price Over the Phone

Anyone who gives you an exact number sight-unseen is either guessing or planning to add costs later. Slab cracks, moisture readings, and old coating removal all affect labor time, and none of that is visible from a photo alone.

Our process: run the cost calculator for an instant range, then we confirm the exact, written price during a free on-site visit — with your 10% discount already applied if you book within 7 days.

FAQ — Garage Floor Coating Cost

Garage Floor Coating Cost FAQ — DFW

Pricing is fairly consistent across Frisco, Plano, McKinney, Dallas, and the rest of the metro since labor and material costs don’t vary much within the region.

Yes, the total cost is higher, but the per-square-foot rate usually drops as size increases, so a 3-car garage doesn’t cost 50% more than a 2-car garage — typically closer to 30-40% more.

Materials, labor, standard diamond-grind prep, and basic crack filling. Heavy prep like major spalling or extensive moisture mitigation can add cost, which is why we confirm everything on-site first.

Common add-ons to ask about upfront: moisture barrier, extensive crack repair, and disposal of old coating. We fold standard versions of these into our upfront quote.

Run our cost calculator for an instant range in 60 seconds, then request a free on-site assessment for your exact, written price.

Ready for Your Exact Garage Floor Price?

Answer a few questions about your space and get a real price range in 60 seconds — plus 10% off when you submit.

© 2026 LNM Epoxy. All rights reserved. · 4162 Peace Dr, Frisco, TX 75034 · 📞 (469) 850-0660 · Call Center 24/7
Additional Phone: (469) 972-6678