Cost Guide · DFW

Epoxy Flooring Cost per Square Foot: What Changes the Price?

By Alek·Updated August 2026·6 min read

Quick Answer

Epoxy flooring in DFW costs $4.50–$14 per square foot installed, depending on the system, prep needs, and total square footage. Solid color epoxy sits at the low end; metallic and industrial systems sit at the high end. The single biggest swing factor is slab condition, not the coating itself.

Cost per Square Foot by System

System	Cost per Sq Ft	Typical Use
Solid Color Epoxy	$4.50–$6.50	Garages, basements
Chip-Flake Epoxy	$5.50–$8.50	Garages, patios
Metallic Epoxy	$8–$14	Showcase floors
Industrial Epoxy	$6–$12	Warehouses, plants

Get your exact per-square-foot price.

Get My Price →

The Three Factors That Actually Move Your Price

1. Slab condition. Cracks, prior coatings, and moisture issues all add prep time, which is the largest source of price variation between two similarly-sized floors.

2. Total square footage. Bigger jobs unlock a lower per-square-foot rate since fixed costs like equipment setup get spread across more area.

3. Coating system. Decorative and industrial-grade systems cost more per square foot than basic solid color epoxy.

Real DFW Project

Two Coppell homeowners on the same street got quotes for nearly identical 2-car garages. One had a hairline-crack-free slab; the other had a previously failed DIY coating that needed grinding off first — adding about $600 to the total for the extra removal labor.

Slab prep is the biggest cost variable — Coppell, TX

See how much other DFW homeowners paid.

Read Our Reviews →

How to Get an Accurate Number Fast

Rather than guessing from generic “average cost” articles, run our cost calculator with your actual square footage and finish preference for an instant range, then confirm the exact price with a free on-site visit.

FAQ — Cost per Square Foot

Epoxy Flooring Cost per Square Foot FAQ

What’s the average cost per square foot for epoxy flooring in DFW?+

Most residential epoxy jobs in DFW fall between $4.50 and $8.50 per square foot, with decorative and industrial systems running higher.

Does labor or material cost more?+

Labor typically makes up the larger share of the total cost, especially when significant slab prep like grinding or crack repair is needed.

Why do quotes vary so much between contractors?+

Quotes often differ based on how much prep work is included, the grade of materials used, and whether corners are cut on diamond grinding.

Is a bigger floor always cheaper per square foot?+

Generally yes, larger floors see a lower per-square-foot rate since setup costs are spread across more area.

How can I get an exact price for my space?+

Use the cost calculator for an instant range based on your square footage and finish, then confirm the final price during a free on-site visit.

Calculate Your Exact Price Range

Answer a few questions about your space and get a real price range — plus 10% off when you submit.

Calculate Your Price Range →
📞 (469) 850-0660

LNMEpoxy

Epoxy Floor Coating · Dallas–Fort Worth Metro
4162 Peace Dr, Frisco, TX 75034
(469) 850-0660 — Call Center 24/7
Installs: Mon–Sat, 7:00am – 7:00pm

G
Y
f
IG

Resources

Residential

Commercial

Industrial

Service Areas