Design · Patios

Patio Coating Ideas for Texas Backyards: Flake Blends, Colors & Slip Resistance

By Alek·Updated September 2026·4 min read

Quick Answer

The most popular DFW patio coatings are light to mid-tone chip-flake blends — they hide dirt, stay cooler than dark colors, and look good next to stone and brick. Add anti-slip texture for wet areas and a UV-stable topcoat so the color lasts. Patio full-flake systems start at $4.99 per sq ft.

Covered back patio with a warm gray and bronze metallic epoxy floor
Metallic finishes work best on covered, shaded patios.

Popular Looks for DFW Patios

Stone-inspired flake blends

Tan, gray, and cream flake blends pick up the tones of Austin stone and brick — the most common exterior materials on DFW homes. They make the patio feel like part of the house.

Light gray and granite blends

Clean and neutral, and one of the coolest options underfoot. A good choice for modern homes and uncovered patios with full sun.

Metallic finishes for covered areas

Metallic coatings create a dramatic, marble-like look. Outdoors, keep them to covered or shaded patios, add a UV-stable topcoat, and add texture — smooth metallic is slippery when wet.

Practical Choices That Matter

  • Color and heat. Lighter blends reflect sunlight and stay more comfortable. Save dark colors for covered areas.
  • Hiding dirt. Busy, multi-color flake blends hide leaves, pollen, and footprints far better than solid colors.
  • Traction. Anti-slip grit in the topcoat is a must near pools, grills, and sprinklers.
  • Fading. A UV-stable polyaspartic topcoat keeps colors from yellowing in direct sun.
Open patio with a cream and tan stone-blend chip-flake coating next to an Austin stone wall
A stone-blend flake picks up the tones of limestone and brick.

Pick a look, then see your price in 60 seconds.

Get My Price →

What a Patio Coating Costs

Patio full-flake systems start at $4.99 per square foot, with a $1,299 project minimum. A 300 sq ft patio starts around $1,497. Metallic finishes start at $5.99 per sq ft.

LNM Tip

Order samples of two or three blends and look at them outside at different times of day. Flake colors shift a lot between morning shade and afternoon sun.

Browse the patio coating service or see this year’s most popular flake blends.

FAQ — Patio Coating Ideas

Patio Coating FAQ — DFW

A chip-flake system with a UV-stable polyaspartic topcoat and anti-slip texture. It handles sun, rain, and foot traffic and hides dirt well.

Patio full-flake systems start at $4.99 per square foot with a $1,299 project minimum. Metallic finishes start at $5.99 per square foot.

Yes, on covered or shaded patios, with a UV-stable topcoat and anti-slip texture. We don’t recommend it for areas in full, all-day sun.

Not with a UV-stable topcoat. Standard epoxy without one can yellow outdoors, which is why every LNM exterior system uses a UV-stable topcoat.

Light foot traffic is usually fine the next day. We’ll give you exact timing for furniture and grills based on the system and weather.

Ready to Upgrade Your Patio?

Answer a few questions about your space and get a real price range in 60 seconds — plus 10% off when you submit.

Use Cost Calculator →
📞 (469) 850-0660

LNMEpoxy
Epoxy Floor Coating · Dallas–Fort Worth Metro
4162 Peace Dr, Frisco, TX 75034
(469) 850-0660 — Call Center 24/7
Installs: Mon–Sat, 7:00am – 7:00pm
G
Y
f
IG

Resources

Residential

Commercial

Industrial

Service Areas

© 2026 LNM Epoxy. All rights reserved. · 4162 Peace Dr, Frisco, TX 75034 · 📞 (469) 850-0660 · Call Center 24/7
Additional Phone: (469) 972-6678