Comparison · Pool Decks

Pool Deck Coating vs. Pavers vs. Resurfacing: Which Is Right for Your DFW Home?

By Alek·Updated September 2026·4 min read

Quick Answer

If your concrete is structurally sound, a coating is usually the fastest and most affordable upgrade — LNM’s pool deck system starts at $4.99/sq ft. Resurfacing fits decks with heavy spalling or uneven surfaces. Pavers cost the most and take the longest, but make sense if you’re redesigning the whole backyard.

Freeform pool with a seamless sandstone-color coated concrete deck and sealed control joints
A coating goes over sound existing concrete — no demolition.

Side-by-Side Comparison

Coating Resurfacing Pavers
Best for Sound concrete, new look Spalled or uneven concrete Full backyard redesign
Relative cost Lowest Mid Highest
Typical install 1–3 days Several days Days to weeks
Demolition None None Usually yes
Upkeep Rinse and mild cleaner Periodic resealing Weeds, sand, shifting

LNM pool deck coatings start at $4.99/sq ft with a $1,299 project minimum. Resurfacing and paver costs vary widely by contractor and material.

When a Coating Is the Right Call

A coating bonds to your existing slab, so there’s no demolition and no hauling. It works when the concrete is structurally sound — minor cracks and surface wear are fine; they’re filled during prep. You get a new color, better traction, and an easy-to-clean surface, usually in a few days.

When Resurfacing Makes More Sense

If the surface is badly spalled, flaking, or pitted, a coating alone won’t level it out. A cementitious overlay rebuilds the surface first. It costs more than a coating and needs more cure time, but it’s cheaper than tearing the deck out.

When Pavers Are Worth It

Pavers are a good fit when you’re changing the deck’s shape, adding square footage, or redesigning the backyard. The trade-offs: higher cost, longer install, and ongoing upkeep — joint sand washes out, weeds grow, and North Texas clay can make individual pavers settle or shift.

Find out if your deck is a coating candidate.

Get My Price →

How We Decide

During the free assessment we check for heaving, wide structural cracks, and hollow spots. If the slab is sound, we’ll recommend a coating. If it isn’t, we’ll tell you — there’s no point coating concrete that needs replacing.

Related reading: pool deck coating cost in DFW and coating over cracked concrete.

FAQ — Coating vs. Pavers vs. Resurfacing

Coating vs. Pavers vs. Resurfacing FAQ

Yes, in nearly every case. A coating uses your existing slab, so there’s no demolition, base prep, or paver material. LNM pool deck coatings start at $4.99/sq ft.

Usually. Hairline and minor cracks are filled during prep. Heaving or wide structural cracks may need repair first, which we identify during the assessment.

Most residential decks are completed in one to three days, depending on size and prep. You can typically walk on it the next day.

Pavers themselves are durable, but they need ongoing maintenance for sand, weeds, and settling. A well-installed coating needs little more than rinsing.

Often, yes, if the overlay is still bonded. Loose or delaminating overlays have to be removed first.

Is Your Deck a Coating Candidate?

Get a real price range in 60 seconds, then a free on-site check to confirm the right option — plus 10% off when you submit.

© 2026 LNM Epoxy. All rights reserved. · 4162 Peace Dr, Frisco, TX 75034 · 📞 (469) 850-0660 · Call Center 24/7
Additional Phone: (469) 972-6678